THE BATTERY SHOW 2019

VACUUM CARBON TECHNOLOGIES THE BATTERY SHOW 2019 Team of Vacuum Carbon Technologies (VCT) led by Nikolai Kazimirov is to visit upcoming exhibition THE BATTERY SHOW 2019 in Stuttgart/Germany on May 7-9th, 2019. THE BATTERY SHOW 2019 VCT Team is to meet with Testing &...

About carbon/graphene coating on metal and plastic surfaces.

VACUUM CARBON TECHNOLOGIES About carbon/graphene coating on metal and plastic surfaces Technically, there are two the most popular methods available on the market of applying carbon compounds on the surface of metal or plastic. The first method is smearing, which you...

Functional films on different materials

VACUUM CARBON TECHNOLOGIES Functional films on different materials We are developing methods for magnetron coatings of functional films on various materials. We created coatings of different complexity: semiconductor coatings, coatings with high hardness and very low...

Energy storage Technology Development.

VACUUM CARBON TECHNOLOGIES energy storage technology First of all, the researchers are looking for an opportunity to increase the specific energy accumulated in one kilogram (liter) of the battery. At present, lithium-ion batteries with specific energy from 110 W ∙ h...

High-Density Current Collector

VACUUM CARBON TECHNOLOGIES House is not built from Roof. Foundation, Walls, and then - Roof. If you make Battery, then you need to start from current supply Electrodes, that is, from Current Collector, which should provide: • Low contact resistance of the metal-active...

Corrosion of Al foil

VACUUM CARBON TECHNOLOGIES Corrosion of Al foil The foil was dried in a vacuum oven at 120°C for 6 h and then transferred to a glove box. Coin cells of Li/electrolyte/Al in which electrolyte and separator were sandwiched between two electrodes were assembled. The...

The Battery Show Europe 2018 report

Visited the exhibition The Battery Show Europe 2018 The Battery Show Europe provides an opportunity to source the latest manufacturing solutions from across the battery supply chain for industries. Donec tempor tortor sit amet sodales blandit. Suspendisse potenti....

Answers for the Investor

The production rate depends on the width of the foil to be sprayed. For example, for a foil width of 1,000 mm, a deposition rate of 1 m per minute and 6,000 work hours. In this case the annual productivity (three shifts, 6,000 hours) will be: 6,000 x 60 = 360,000...

Pin It on Pinterest